Checking the WPS Power Outage Map is important for staying informed on any power outages in your area. Knowing when and where an outage is happening is helpful for planning ahead and staying safe in emergency situations. It is also helpful for understanding how power outages may affect your area and how you may need to prepare in advance.
What is WPS?
WPS stands for Wisconsin Public Service Corporation and is the main electric and natural gas utility in Northeastern Wisconsin. WPS provides electricity, natural gas, propane, and other energy services to over 450,000 customers in 58 Wisconsin counties.
Power Outage Update: Thousands Remain Without Power in Southern Wisconsin
MADISON, Wis. (WMTV) - Tens of thousands of people in southern Wisconsin were left without power Friday night as severe storms swept through the state, bringing strong winds, heavy rain and hail, as well as a wave of tornado warnings. According to the latest update from Alliant Energy, Columbia County was the hardest hit, with nearly 2,060 customers still without electricity Saturday afternoon.
Sauk County reported nearly 1,800 customers without power Saturday afternoon, with more than 13,000 of its customers in Sauk Co. alone affected in the wake of the storm. In Adams Co., more than two-thirds of the county's 3,479 customers reported outages, but by 9 a.m. Saturday, just over five dozen were still affected.
MG&E reported over 12,000 outages in the Madison-area, and as of 9 a.m. Saturday morning, approximately 2,278 customers were still without power. By 4:40 p.m., that number dropped to 429 customers.
In southeast Wisconsin, We Energies reported on its outage map around 9 a.m. Saturday that more than 62,000 customers in the region were affected, with the Fort Atkinson area having more than 8,400 customers affected. By 4:40 p.m., that number dropped to approximately 36,000 customers.
Anyone experiencing a power outage is asked to call their provider to let them know. For the latest updates on power outages in Wisconsin, please check with your local provider.
How to Check for an WPS Power Outage
To check for an WPS power outage, you can either call 1-800-450-7240 or go to the WPS website and use their outage map: . The map displays the outages in real time and gives you information such as the estimated time of restoration and the cause of the outage.
When you encounter a power outage, you can follow the following steps:
Step 1: Check Your Circuit Breakers
The first step to determining if you have a power outage is to check your circuit breakers. If the circuit breakers are tripped, then you may have a power outage. To reset a tripped breaker, first turn the breaker off, then turn it back on after 10 seconds. If the breaker trips again, then you may have a more serious issue and should contact an electrician.
Step 2: Check Your Neighbors
Another way to determine if you have a power outage is to check your neighbors. If your neighbors also don't have power, then it is likely that you are experiencing a wider power outage. You can either ask your neighbors directly or look outside to see if their lights are off. When you encounter a power outage, you can follow the following steps:
Step 3: Contact Your Utility Provider
If your circuit breakers are normal and your neighbors also have power, then it is likely that the issue is isolated to your home. In this case, you should contact your utility provider to let them know about the issue. You can contact your provider via phone or online using their outage status page.
Step 4: Check the WPS Outage Status Page
Wisconsin Public Service provides an outage status page where customers can easily view updated information about power outages in their area. This page can be found at https://www.wisconsinpublicservice.com/secure/ssl/acct/outage_status. By entering your zip code, you can view a map of the current power outages in your area. The map will also show you the estimated restoration time for each outage.
WPS(Wisconsin Public Service) Power Outage Map for Wisconsin
| Provider | Customers Tracked | Customers Out | Last Updated |
|---|---|---|---|
| Adams-Columbia Electric Cooperative | 38,769 | 120 | 23-08-10 10:30:13 AM |
| Alliant Energy | 496,632 | 20 | 23-08-09 12:23:41 PM |
| Pierce Pepin Cooperative Services | 7,807 | 320 | 23-08-10 10:30:15 AM |
| Polk-Burnett Electric Cooperative | 21,761 | 20 | 23-08-09 11:46:49 PM |
| Rock Energy Cooperative | 14,414 | 20 | 23-08-10 10:30:00 AM |
| St. Croix Electric Cooperative | 11,576 | 20 | 23-08-10 10:30:12 AM |
| Sun Prairie Utilities | 33,000 | 49 | 23-08-10 10:30:17 AM |
| Taylor Electric Cooperative | 4,447 | 20 | 23-08-10 10:30:15 AM |
| Vernon Electric Cooperative | 11,873 | 20 | 23-08-10 10:30:15 AM |
| Water Works and Lighting Commission | 17,829 | 20 | 23-08-10 10:30:15 AM |
| Wisconsin Electric Power Company | 1,121,039 | 185 | 23-08-10 10:30:11 AM |
| Wisconsin Public Service | 457,000 | 84 | 23-08-10 10:30:16 AM |
| Xcel Energy | 258,672 | 20 | 23-08-10 10:22:04 AM |
What Does the WPS Power Outage Map Show?
The WPS Power Outage Map shows current and past power outages in the service area. Outage details such as type, cause, estimated restoration time, customer count affected, and other information is provided. The map also includes a more detailed view of the outage, allowing customers to see the exact locations affected and estimate the affected area.
What is the Cause of a Power Cut?
The cause of a power cut at WPS can vary, but often times it is due to a downed power line, a problem with a transformer, or weather-related issues such as a severe storm or high winds. It is important to remember that WPS does not control the weather, so power outages due to weather-related occurrences are out of their control.
Where are the Most Power Outages(Affected Areas)?
The majority of power outages at WPS occur in the North and Central Wisconsin counties of Langlade, Lincoln, Marathon, Portage, Shawano, and Wood. These counties are the most likely to experience outages due to their higher population concentrations and their proximity to more rural areas.
How Do I Report a Power Outage to WPS?
If you experience a power outage with WPS, you can report it by calling 1-800-450-7240 and speaking to a customer service representative. You can also submit an outage report online on the WPS website. Be sure to provide your address and contact information so that WPS can respond to your report as quickly as possible.
Average Power Outages in Wisconsin
Power outages are an unfortunate fact of life in Wisconsin, and they can last anywhere from a few minutes to several days. On average, power outages in Wisconsin last for about an hour. While this is the typically the case, it is important to note that the duration of an outage can vary depending on multiple factors, including the severity of the outage, the region of the state, and the availability of repair crews.
Overall, power outages in Wisconsin typically last for less than an hour. While there are a number of factors that can contribute to the length of an outage, most outages are relatively short in duration. It is important to note, however, that outages caused by more severe events or equipment malfunctions can last much longer.
What are the effects of a WPS Power Outage?
The effects of a WPS Power Outage depend on its severity and the duration of the outage. If an outage is brief, most people will not experience any major issues. However, if the outage lasts for an extended period of time, businesses and individuals may suffer from a loss of electricity, financial losses due to spoiled food, or safety concerns from using emergency generators or alternate power sources.
What should I do if I experience a WPS Power Outage?
If you experience a WPS Power Outage, you should immediately contact your local WPS office to report the outage and get an update on when power may be restored. Additionally, you should unplug all electronic items to avoid potential damage if power is restored unexpectedly. If you are using an emergency generator, you must make sure it is properly ventilated and located away from any flammable materials.
What can I do to prepare for a WPS Power Outage?
The best way to prepare for a potential WPS Power Outage is to make sure you have a plan in place. This should include having a reliable source of electricity, such as a generator, along with an emergency kit that includes flashlights, spare batteries, a first aid kit, and non-perishable food and water. Additionally, it’s important to stay informed by signing up for WPS email and text alerts so you can receive notifications regarding any upcoming outages or other important updates.
The Bluetti AC500 + B300S Home Battery Backup: 24/7 Power When You Need It Most
Reliable Backup During Power Outages
The Bluetti AC500 + B300S Home Battery Backup is the perfect solution for when the power goes out. Designed to provide power during prolonged power outages and other emergency situations, this top-of-the-line system includes an AC500 power station and a B300S expansion battery. Together, they provide a total storage capacity of up to 18,432Wh, enough to keep your essential appliances and devices running in the event of a power outage.Flexible & Versatile
The AC500 includes 16 versatile ports that make it suitable for a wide range of appliances. The NEMA 14-50R, TT-30, and L14-30 ports provide powerful and reliable connections, perfect for charging heavy-duty appliances such as refrigerators, air conditioners, TVs, and computers. The AC500 is also designed to be quickly charged, with a maximum input of 4,500W (dual charging by solar and grid) and a full charge in less than one hour.
24/7 Home Backup System
The Bluetti AC500 + B300S Home Battery Backup can provide backup power to an entire home during an unexpected power outage. With its high storage capacity, you can be sure that your home will have reliable power for as long as needed. And for added peace of mind, the system is designed to be easily connected to the grid by a licensed electrician.What You Get
In addition to the AC500 power station and B300S expansion battery, the package comes with an AC charging cable, DC input cable, car charging cable, and P150D battery expansion cable, ensuring that you have all the connections you need to get up and running. Plus, you will also get a user manual and a 3-year warranty that guarantees the quality of your purchase.
For those living in areas prone to power outages, the Bluetti AC500 + B300S Home Battery Backup is an excellent choice. With its high storage capacity, fast recharging capability, and versatile ports, it provides reliable power when you need it most. So, if you’re looking for a reliable and versatile home backup system, the Bluetti AC500 + B300S is the perfect solution!
How does WPS work to restore power during an outage?
When an outage occurs, WPS works to immediately identify the cause and then begins restoring power as quickly and safely as possible. After a cause has been identified, WPS will start the process of restoring power to all affected customers. Depending on the cause, this may involve sending out crews to repair or replace equipment, or manually rerouting power to avoid overloading certain sections of the grid. Once power has been restored, WPS will typically provide an update to customers on their website and via email or text.
You Might Also Like:
| AEP Phone Number | Avista Outage Map | Chickasaw Electric | Puget Sound Energy Outage Map | BGE Customer Service Number | Alabama Power Login | PEC Outage Map | PECO Pay My Bill | Power Outage Las Vegas | Check Power Outages by Zip Code, Texas | Cumberland Valley Electric | Centerpoint Outage Phone Number | Chickasaw Electric | Entergy Phone Number | Oncor Outage Map Dallas | Rhode Island Energy Customer Service | AEP Power Outage | EPB One Time Payment | PPL Outage Map | Puget Sound Energy Outage Map|
